产品分类
首页 > English > Products > Lead-plated Batteries
产品配置特点
        
 
 characteristics
Sendon gel battery with fumed silica and a variety of additives made of silicon gel, its structure is a three-dimensionalporous network structure, sulfate may be adsorbed on the gel, the gel in the capillary crack for positive precipitationoxygen to reach the negative electrode to establish channel, thus realizing the sealing reaction efficiency is established,so that the battery fully sealed, no electrolyte the overflow and the precipitation of acid fog, pollution-free environment and equipment.
Sendon unique positive and negative pole lead paste formula, the storage battery has excellent electrical properties, and improve the service life of the electrode plate;
Using the integrated terminal, battery using the system connection, even if at the time of installation can also prevent theoccurrence of short circuit, and the corrosion resistance of the battery, but also prolongs the service life;
The thick plate design, reducing the grid is corrosive, greatly improving the cycle life of batteries;
A wide range of operating environment, suitable for high temperature and low temperature environment; the low self discharge rate, the self-discharge rate of less than 2.5% per month;
Smoothing of the battery cover with a handle, convenient cleaning, and easy to carry.
The colloidal battery electrolyte in gel state, does not flow, no leakage, can be vertical or horizontal arrangement.
The grid structure: polar ear position and angle offset type design, 2V series of positive plate bottom bag with plasticprotective film, can improve the battery in the work reliability, alloy using lead calcium tin aluminium alloy, hydrogen evolution potential negative plate. Positive plate alloy of high tin low calcium alloy, its organizational structure grain size small density, good corrosion resistance, the battery has a long service life characteristics.
The separator adopts imported colloidal battery special corrugated type PVC separator, the separator porosity, low resistance.
The battery slot cover, for ABS material, and adopts the epoxy resin sealing, to ensure that no leakage.
The pole is made of pure lead material, corrosion resistance, pole and battery cover adopts the pressing ring structurenamely the pressure ring and the sealing ring to realize mechanical seal of battery pole, using resin sealant adhesive,ensure the sealing reliability.
The 2V, 12V full range of battery with filter gas explosion-proof device, battery external encounter fire without detonating,and the gas filter, which has no pollution to the environment.
The colloidal battery electrolyte gel electrolyte, no acid stratification phenomenon, make plate ministries uniform reaction,enhances the large battery capacity and service life reliability.
The excess electrolyte, colloidal injection into sol state, can be filled with all the space in the battery. Cells in the high-temperature and overcharge situations, not prone to drying out, the battery heat capacity, heat dissipation is good, not easy to generate thermal runaway.
The colloidal battery gel electrolyte on the positive electrode, negative electrode active material crystallization process toproduce beneficial effect, so that the battery deep discharge cycle ability, anti negative sulphation capacity increased, so that the battery in discharge after recovery ability is greatly improved.
The battery temperature range ( -30℃ ~ 50), low self-discharge.
Product technical parameters


Sendon colloid valve controlled sealed lead-acid battery
Model
Cell size ( mm )
Weight
Internal resistance
Capacity AH1hr1.75v
Capacity AH2hr1.75v
Capacity AH3hr1.75v
Capacity AH5hr1.75v
Capacity AH10hr1.75v
Capacity AH20hr1.75v
Capacity AH100hr1.75v
Long
Wide
High
Total height
Kg m Ω ±0.2 
12V18AH 181 76 168 168 5.8 12.5 8.5 10.8 12.5 13.5 15.0 16.0 18.2
12V26AH 166 126 176 176 10.0 8.35 14.0 16.5 19.0 21.0 24.0 26.0 29.0
12V33AH 195 131 151 151 11.0 9.75 15.0 19.0 22.0 24.0 28.0 31.0 35.0
12V38AH 198 166 170 170 13.8 8.15 21.0 25.0 27.0 30.0 33.0 36.0 40.0
12V40AH 198 166 170 170 14.8 7.55 23.0 26.0 29.0 32.0 36.0 40.0 44.0
12V55AH 229 138 214 214 19.0 5.85 30.0 36.0 39.0 42.0 50.0 55.0 60.0
12V70AH 260 168 214 214 25.5 5.35 38.0 46.0 50.0 54.0 65.0 70.0 76.0
12V80AH 260 168 214 214 26.5 5.15 42.0 50.0 55.0 60.0 70.0 80.0 85.0
12V90AH 306 168 214 214 30.5 4.55 49.0 58.0 64.0 70.0 81.0 90.0 100.0
12V100AH 306 168 214 214 32.5 4.35 54.0 65.0 70.0 75.0 90.0 99.0 105.0
12V110AH 329 173 234 234 37.5 4.75 59.0 75.0 78.0 85.0 102.0 115.0 120.0
12V135AH 341 173 281 281 42.5 4.25 65.0 77.0 83.0 90.0 120.0 135.0 140.0
12V150AH 482 170 238 238 48.5 3.85 81.0 99.0 106.0 115.0 135.0 150.0 160.0
12V200AH 520 238 223 223 66.0 3.50 108.0 130.0 140.0 155.0 180.0 200.0 220.0
12V250AH 520 268 220 220 80.5 3.40 125.0 150.0 165.0 180.0 220.0 240.0 260.0
 
Model
Cell size ( mm )
Weight
Internal resistance
Capacity AH1hr1.75v
Capacity AH2hr1.75v
Capacity AH3hr1.75v
Capacity AH5hr1.75v
Capacity AH10hr1.75v
Capacity AH20hr1.75v
Capacity AH100hr1.75v
Long
Wide
High
Total height
Kg m Ω ±0.2 
2V150AH 172 102 205 228 9.55 1.02 82.5 97.0 112.5 127.5 150.0 157.0 160.0
2V200AH 173 111 329 365 15.0 0.95 110.0 130.0 150.0 170.0 200.0 210.0 220.0
2V300AH 171 151 330 366 23.5 0.90 165.0 195.0 225.0 255.0 300.0 315.0 330.0
2V400AH 211 176 329 367 29.0 0.85 220.0 260.0 300.0 340.0 400.0 420.0 440.0
2V500AH 242 172 330 366 38.8 0.80 275.0 325.0 375.0 425.0 500.0 525.0 550.0
2V600AH 301 175 331 366 43.0 0.75 330.0 390.0 450.0 510.0 600.0 630.0 660.0
2V800AH 410 175 330 366 58.5 0.68 440.0 520.0 600.0 680.0 800.0 840.0 880.0
2V1000AH 475 175 328 366 69.2 0.55 550.0 650.0 750.0 850.0 1000.0 1050.0 1050.0
放电数据:允许±5%
以上数据若有变动,恕不另行通知。以实物为准。
Copyright © 2004-2011 Socemen.com All Rights Reserved 京ICP备13000001号
电话:010-51292274(中继线) 82521938 传真:010-82521939 Email:chendan517@126.com
地址:北京市海淀区科学院南路新科祥园9号楼21层